Frames

available for 250, 280, 300, AND 330 TIRE

Now Available for The Monster 360

  WWCC Stingray 280/300/330 Right-side-drive Frame

The Stingray 280/300/330 frame is TIG-welded on state-of-the-art jigs using only the highest quality materials. Assuring proper engine and transmission alignment.

Oil is run through the low seat design frame eliminating the need for an oil tank.

Recent tests have shown that with the added oil capacity (about 5 quarts total) and increased cooling area, the Stingray frame cools the oil temperature better than non-internal oil frames. (Tests were done using a new S&S 124" motor which generally operates at about 225 degrees (oil temperature), the Stingray keeps it at about 175 degrees) without an  oil cooler. 

So if you are planning to use a big displacement motor in your next project, the WWCC Stingray frame will handle the job.

Note the hidden battery box built into the frame underneath the seat.

The Stingray has an exclusive Right-side-drive setup which allows the final-drive belt to be changed WITHOUT removing the swingarm.

The WWCC Stingray frame is available in any rake and any stretch, and is the perfect frame for your next custom project.